Senate Ways & Means has replaced the bill with amended version S.2696
Art for these three postcards is available for your use free of charge with no attribution required.
Print professionally:
Print at home:
Use Avery 8387 or compatible cards and print at 100%
Print professionally:
Print at home:
Use Avery 8387 or compatible cards and print at 100%
Print professionally:
Print at home:
Use Avery 8387 or compatible cards and print at 100%
For the lowest cost option, either purchase a pre-stamped blank postcard from the post office, or make your own postcard. If you make your own, follow these requirements:
Make sure to use card stock, not paper.
The most common size is 4" x 6" but the card must be rectangular, horizontal (landscape), 3.5" to 6" tall, and 5" to 9" wide.
On the back of the card:
Reserve 5/8" at the bottom of the card, extending 4.75" from the right of the card, for the post office to add a sorting barcode.
Reserve at least 2-1/8" from the right of the card for the address space.
For more information, see the USPS Mailpiece Design Requirements.